What Sizes Do UPVC Doors Come In? How to Check Sizes When Existing Door Frames Are Non-Standard
Summary
UPVC doors at Feel Wood are basically available in sizes 70x200, 80x200, and 90x200 cm, with a thickness of 3.5 cm. If the existing door frame is non-standard, you must measure the opening and have the store verify it before ordering.
Key takeaways
- Basic UPVC door sizes are 70×200, 80×200, and 90×200 centimeters with a thickness of 3.5 centimeters.
- Existing door frames should be measured at multiple locations and site photos sent before selecting a door size.
- Custom UPVC sizes and the 90×190 centimeter size require store verification for model compatibility and feasibility on a case-by-case basis.
- Pricing must separate the door panel, hardware, frame, and installation costs.
The basic UPVC door sizes available at Feel Wood are 70 × 200, 80 × 200, and 90 × 200 centimeters, with a panel thickness of 3.5 centimeters. However, the size written on the door panel does not mean it can be immediately installed into every existing door frame, especially in old houses, renovation projects, or non-standard frames.
Basic UPVC Door Sizes Available
Panel SizeThicknessThings to Check Additionally 70 × 200 cm3.5 cmInternal frame size and installation clearance 80 × 200 cm3.5 cmInternal frame size and opening direction 90 × 200 cm3.5 cmSwing area and required hardwareThis list represents basic sizes; models, colors, patterns, and stock may change, so you should consult the store again before making a payment or preparing the opening.
Can Non-Standard Door Frames Use Pre-Hung Doors?
You must check the actual measurements first. If the frame opening is much smaller or larger than the door panel, forced installation may cause uneven gaps around the panel, difficult opening and closing, or require additional wall and frame modifications. Alternatives include adjusting the frame, choosing a different panel size, or having the store check whether custom sizes can be produced for the model of interest.
Currently, information on custom-produced UPVC sizes must be checked on a case-by-case basis because conditions depend on the product model, panel structure, and required dimensions. The store can confirm after seeing the dimensions and site information.
How to Measure Before Consulting the Store
- Measure the width at the top, middle, and bottom of the opening inside the frame.
- Measure the height on the left, middle, and right.
- Measure the thickness of the existing frame and wall.
- Take photos of the front, back, hinges, threshold, and a wide-angle view of the area.
- State whether you want an inward or outward swing and which side the hinges are on when viewed from the specified side.
Do not measure at just a single point, as the existing frame may be crooked or uneven. Providing measurements at multiple locations helps the team better identify discrepancies.
How is Pricing Calculated for 90 × 190 cm or Custom Sizes?
The 90 × 190 centimeter size is not included in the basic size list above, so you should not directly reference the price of a 90 × 200 centimeter panel. It must be checked first whether the desired model supports this size or if the frame should be adjusted. The final price also depends on the color, model, hardware, and installation work.
Sending Information to the Store for Verification
Send site photos along with the width, height, frame thickness, number of panels, and site province via LINE @feelwood or the contact us page. The team will help check which size should be used and whether additional work evaluation is required.
Frequently asked questions
What standard sizes do UPVC doors come in?
The basic sizes available at Feel Wood are 70×200, 80×200, and 90×200 centimeters with a panel thickness of 3.5 centimeters, subject to model and stock verification.
Are 90×190 centimeter UPVC doors available?
This size is not in the basic list. The store must verify supported models or frame adjustment guidelines before products and pricing can be confirmed.
Can I order custom-sized UPVC doors if my existing frame is non-standard?
This must be checked on a case-by-case basis. Please send measurements from multiple locations, frame photos, and the model of interest for evaluation, as custom sizes are not automatically made for every design.
Where do I need to take measurements?
Measure the top, middle, and bottom width, left, middle, and right height, and frame thickness, and take photos of both sides while stating the opening direction.